Home
 

Polymeric


1000 - TRIFLEX 3-LAYER COMBINATIONS

General purpose Triflex™ tan natural rubber lining. Soft -Hard-Soft. Excellent in combined abrasion and chemical resistance. Flexible to withstand rapid changes in temperature and related expansion and contraction. A-I-E Cure. FDA compliant

1000 (205.6 KB) MSDS Coming Soon

1001 - TRIFLEX 3-LAYER COMBINATION

55A durometer black, natural rubber, chemical cure Triflex™. Soft-Hard Soft. Excellent in combined abrasion and chemical resistance. Flexible to withstand rapid changes in temperature and related expansion and contraction. FDA compliant. For FDA service use C-600 activator and for non-FDA service use C-700 activator. Ambient or steam assist.

1001 (203.7 KB) MSDS Coming Soon

1003 - SEMI-HARD NATURAL RUBBER

Black general purpose 90A durometer semi hard lining with or without tie gum. Excellent chemical and temperature resistance. Superior performance in water treatment equipment. A-I-E Cure. FDA compliant

1003 (151.1 KB) MSDS Coming Soon

1004 - SEMI-HARD NATURAL RUBBER

Black 60 D durometer Superflexite A, semi-hard natural rubber lining with soft natural rubber tie gum with excellent chemical and temperature resistance at elevated temperatures. A-I-E Cure.

1004 (205.3 KB) MSDS Coming Soon

1006 - SEMI-HARD NATURAL RUBBER

Black " Acidseal E" 70 D durometer general purpose hard natural rubber lining with soft natural rubber tie gum for severe corrosion at elevated temperatures. A-I-E Cure

1006 (151.5 KB) MSDS Coming Soon

1008 - TRIFLEX 3-LAYER COMBINATIONS

Black, 60A surface durometer Triflex™ Soft-Hard-Soft combines excellent abrasion and chemical properties with low water absorption characteristics. Flexible to withstand rapid changes in temperatures and related expansion and contraction. Excellent for FGD scrubber module application. A-I-E Cure. FDA compliant.

1008 (205.3 KB) MSDS Coming Soon

1014 - CHLOROBUTYL FACED TRIFLEX

White chlorobutyl faced Triflex™ which combines excellent chemical resistance with low water absorption characteristics.

1014 (205.1 KB) MSDS Coming Soon

1015 - TRIFLEX 3-LAYER COMBINATIONS

Black 50D surface durometer "Triflex™" consisting of a semi-hard face stock with a hard natural rubber center layer and a soft natural rubber tie gum. The lining has excellent chemical and permeation resistance properties. Operating temperature range is from 50°F (10oC) to 185°F (85oC)

1015 (204.4 KB) MSDS Coming Soon

1017 - SEMI-HARD NATURAL RUBBER

A general purpose 90A durometer black, semi-hard lining with excellent chemical and temperature resistance. Superior performance in water treatment equipment.

1017 (204.1 KB) MSDS Coming Soon

1019 HT - TRIFLEX 3-LAYER COMBINATIONS

50A durometer high temperature Triflex™, Tan / Black / Tan. Excellent chemical resistance properties in high temperature services up to 220 F. Developed for phosphoric acid service. A-I-E Cure.

1019 HT (204.2 KB) MSDS Coming Soon

1020 HT - TRIFLEX 3-LAYER COMBINATIONS

Tan 50A durometer high temperature Triflex, excellent chemical resistance properties in high temperature services up to 220 F. Developed for phosphoric acid service. A-I-E Cure.

1020 HT (204.2 KB) MSDS Coming Soon

1022 - TRIFLEX 3-LAYER COMBINATION

55A durometer tan, natural rubber, chemical cure Triflex™. Soft-Hard Soft. Excellent in combined abrasion and chemical resistance. Flexible to withstand rapid changes in temperature and related expansion and contraction. FDA compliant. For FDA service use C-600 activator and for non-FDA service use C-700 activator. Ambient or steam assist.

1022 (202.6 KB) MSDS Coming Soon

1024 - CHLOROBUTYL LINING

Black 50 shore A durometer chlorobutyl lining developed to handle strong bleach solution.

1024 (204.6 KB) MSDS Coming Soon

1032 - SOFT NATURAL RUBBER

50 A durometer soft black natural rubber with sticky back tie gum. Excellent chemical, abrasion and tear resistance. Also compounded for maximum water absorption resistance. FDA compliant. A-I- E cure.

1032 (203.6 KB) MSDS Coming Soon

1035 - SEMI-HARD NATURAL RUBBER

Black 55 shore D durometer general purpose field curing semi-hard natural rubber lining, "Superflexite B". Uses soft natural rubber tie gum. Excellent semi-hard lining with excellent chemical resistance at elevated temperature. A-I-E Cured.

1035 (204.9 KB) MSDS Coming Soon

1036 - SEMI-HARD FLEXIBLE RUBBER

A black 85 A durometer (35 D) combination of natural rubber and synthetic materials with or without soft natural rubber tie gum. Excellent chemical resistance at elevated temperature. FDA compliant. A-I-E cure.

1036 (205 KB) MSDS Coming Soon

1038 - SEMI-HARD CHEMICAL CURE

Black, 85 A/35D durometer chemical cure semi-hard natural rubber with soft natural rubber tie gum. Repair stock for black semi-hard natural rubber. For FDA application use C-600 activator to cure the rubber and for Non-FDA application use C-700. Ambient cure or steam assist cure.

1038 (150.6 KB) MSDS Coming Soon

1040 - WHITE SEMI-HARD NATURAL RUBBER

A general purpose 85A/35D durometer white semi-hard natural rubber with natural rubber tie gum lining with excellent chemical and temperature resistance. Superior performance in water treatment equipment. FDA compliant. A-I-E

1040 (205.2 KB) MSDS Coming Soon

1042 - SEMI-HARD FLEXIBLE RUBBER

White 85A durometer semi-hard ebonite blend of natural rubber and synthetic material with natural rubber tie gum offering maximum resistance to chemical and temperature. A-I-E Cure. FDA compliant.

1042 (204.7 KB) MSDS Coming Soon

1048 - SEMI-HARD NATURAL RUBBER

A general purpose black 85 A / 35 D semi-hard lining with or without natural rubber tie gum. Excellent chemical and temperature resistance and superior performance in water treatment equipment. FDA compliant.

1048 (206.9 KB) MSDS Coming Soon

1051 - PURE CHLOROBUTYL LINING

Black 50A durometer pure Chlorobutyl with soft natural rubber tie gum. Excellent for chemical resistance at elevated temperatures. Superior lining to handle strong sodium hypochlorite solutions up to 15% available chlorine. Suitable for 70% hydrofluoric acid service at maximum 125oF/52oC. A-I-E Cure.

1051 (206.8 KB) MSDS Coming Soon

1053 - GRAPHITIC SEMI-HARD NATURAL

Black 95 shore A / 55 shore D graphite semi-hard lining with soft natural rubber tie gum possessing outstanding resistance to wet chlorine, chlorinated brine and chlorine water solution. A-I-E Cure.

1053 (204.2 KB) MSDS Coming Soon

1054 - BLENDED CHLOROBUTYL LINING

White 40 A durometer blended chlorobuty lining with natural rubber tie gum. General chemical resistance in temperature applications up to 200 oF/93oC. A-I-E Cure. FDA compliant.

1054 (204 KB) MSDS Coming Soon

1055 - BLENDED CHLOROBUTYL LINING

Black, soft, 55A durometer blended chlorobutyl with soft natural rubber tie gum. General purpose chemical resistance at elevated temperatures. Good resistance to some oxidizing chemicals. Excellent in super phosphoric acid. A-I-E Cure. FDA compliant. Also available as an extruded lining.

1055 (203.3 KB) MSDS Coming Soon

1056 HT - BLENDED CHLOROBUTYL LINING

Black 60A durometer blended Chlorobutyl with tan natural rubber tie gum, excellent for chemical resistance properties in high temperature application up to 220oF/104°C.

1056 HT (203.1 KB) MSDS Coming Soon

1058 - CHEMICAL CURE CHLOROBUTYL LINING

White 40A durometer chemical cure Chlorobutyl. General purpose repair stock for white chlorobutyl lining. Excellent chemical with good resistance to heat and some oxidize chemicals. For FDA application use activator C-600, for non-FDA Compliant use activator C-700 to cure the rubber. Ambient cure or Steam Assist Cure.

1058 (150 KB) MSDS Coming Soon

1060 - ARMORITE SOFT NATURAL RUBBER

Black soft 60 A durometer natural rubber with soft natural rubber tie gum with excellent abrasion chemical and tear resistance.

1060 (204.8 KB) MSDS Coming Soon

1061 - SOFT NATURAL RUBBER LININGS

Black 60A durometer natural rubber lining with excellent chemical, abrasion and tear resistance. Compound is highly reinforced to offer these features. A-I-E Cure. FDA compliant.

1061 (202 KB) MSDS Coming Soon

1064 - WHITE NATURAL RUBBER

White 60A durometer natural rubber lining used in food grade services where a non-staining lining is required. A-I-E Cure. FDA compliant.

1064 (202.6 KB) MSDS Coming Soon

1069 - BLACK NATURAL RUBBER LINING

Black 60A natural rubber lining with excellent chemical, abrasion and tear resistance. It has excellent machining and grinding characteristics. It is FDA compliant as per 21CFR177.2600. Operating temperaturerange from -40°F to 160°F.

1069 (202.4 KB) MSDS Coming Soon

1077 HT - CHLOROBUTYL "TRIFLEX" COMBINATION

Black 65A chlorobutyl Triflex™ which combines excellent abrasion and chemical resistance properties with low water absorption characteristics. It is flexible to withstand expansion and contraction due to rapid changes in temperature. It is an excellent lining for FGD scrubber module application and the phosphoric acid/defaomer industry. Operating temperature range is from -4°F(-20°C) to 220°F (104°C).

1077 HT (206.1 KB) MSDS Coming Soon

1097 - TAN NATURAL RUBBER LINING

Tan 60A durometer natural rubber lining with excellent chemical, abrasion and tear resistance. It has excellent machining and grinding characteristics. It is FDA compliant as per 21CFR177.2600. Operating temperature range is from - 40°F (-40oC) to 160°F (71oC)

1097 (202.5 KB) MSDS Coming Soon

1099 - SOFT NATURAL RUBBER LINING

Tan, strained, 35A durometer smoked sheet natural rubber pure gum lining with sticky back tie-gum. The lining of choice for HCL applications including large storage tanks, railcars and tank trucks. Provides excellent chemical, abrasion and tear resistance. It is FDA compliant as per 21CFR177.2600. Operating temperature range is from - 40°F (-40oC) to 160°F (71oC).

1099 (205.3 KB) MSDS Coming Soon

1400 - SOFT NATURAL RUBBER LINING

60A durometer black natural rubber compound which combines excellent physical properties, abrasion resistance, impact resistance and ozone resistance. Design for application in standard flotation systems specifying natural rubber. Operating temperature range is from - 40°F (-40oC) to 159°F (70oC).

1400 (204.8 KB) MSDS Coming Soon

2000 - SOFT NATURAL RUBBER LINING

Tan, strained 35A durometer pure gum natural rubber lining "Acidseal MA" with or without sticky back tie gum. Provides excellent chemical, abrasion and tear resistance. Ideal for HCL applications including large storage tanks, railcars and truck tanks. It is FDA compliant as per 21CFR177.2600. Operating temperature range is from - 40°F (-40oC) to 160°F (71oC).

2000 (203.9 KB) MSDS Coming Soon

2001 - SOFT NATURAL RUBBER LINING

Black, strained, 40A durometer, natural pure gum rubber lining "Acidseal MA" with excellent chemical, abrasion and tear resistance properties. A-I-E Cure. FDA compliant.

2001 (202.9 KB) MSDS Coming Soon

2002 - SOFT NATURAL RUBBER LINING

Soft, 43A durometer black natural rubber lining combining excellent chemical and abrasion resistance properties.

2002 (202 KB) MSDS Coming Soon

2004 - SOFT NATURAL RUBBER LINING

White 35A durometer natural pure gum rubber lining with excellent chemical, abrasion and tear resistance. Used in food grade services where a non-staining lining is required. A-I-E Cure. FDA compliant.

2004 (202.3 KB) MSDS Coming Soon

2006 - CHLOROBUTYL WITH NO TIE GUM

Black 50A durometer chlorobutyl rubber lining with no tie gum used as ply up material for 1051 chlorobutyl lining.

2006 (207 KB) MSDS Coming Soon

2007 - CHLOROBUTYL CAP STRIP

50A durometer "Pure" chlorobutyl rubber lining used for stripping butt joints on chlorobutyl 1051 and 2006.

2007 (204 KB) MSDS Coming Soon

2010 - NEOPRENE RUBBER LINING

Black 60A durometer general purpose black neoprene lining with good abrasion, weathering, flame retarded and corrosion resistance properties. Good machining properties. A-I-E Cure.

2010 (202.1 KB) MSDS Coming Soon

2011 - NEOPRENE RUBBER LINING

Black 60A durometer general purpose black neoprene lining with good abrasion, weathering, flame retarded and corrosion resistance properties. Good machining properties. A-I-E Cure.

2011 (202.8 KB) MSDS Coming Soon

2012 - NEOPRENE RUBBER LINING

Black 60A durometer general purpose black neoprene lining with good abrasion, weathering, flame retarded and corrosion resistance properties. Good machining properties. A-I-E Cure.

2012 (202.5 KB) MSDS Coming Soon

2013 - CHEMICAL CURE NEOPRENE RUBBER LINING

Black 60A durometer general purpose chemical cure neoprene lining with good abrasion, weathering, flame retarded and corrosion resistance properties.

2013 (149.7 KB) MSDS Coming Soon

2017 - SEMI-HARD NATURAL RUBBER

Superflexite B A black general purpose 55 D semi-hard natural rubber lining with excellent chemical at elevated temperature.

2017 (205.7 KB) MSDS Coming Soon

2019 - SOFT NATURAL RUBBER LININGS

Black, 50A durometer soft chemical cure natural rubber. General purpose repair stock for black soft natural rubber. Activator C-600 (FDA compliant) or Activator C-700 (non-FDA compliant) is used to cure the rubber. Ambient cure or Steam Assist cure.

2019 (149.4 KB) MSDS Coming Soon

2020 - SOFT NATURAL RUBBER LININGS

Black 47A durometer soft natural rubber lining combining excellent corrosion resistance with good physical properties and abrasion resistance. A-I-E Cure.

2020 (202.3 KB) MSDS Coming Soon

2027 - RED NATURAL RUBBER LINING

Red, 35A durometer natural rubber lining for superior abrasion resistance for the mining industry. It provides excellent service in pipe application.

2027 (202.3 KB) MSDS Coming Soon

2033 - SOFT NATURAL RUBBER LINING

50 A durometer natural rubber compound which combines excellent physical properties and abrasion resistance along with ozone, oxygen and weather resistance.

2033 (202.4 KB) MSDS Coming Soon

2033P - SOFT NATURAL RUBBER LINING

60 A durometer natural rubber compound which combines excellent physical properties and abrasion resistance along with ozone, oxygen and weather resistance. Also available with soft natural rubber tie gum.

2033P (202.3 KB) MSDS Coming Soon

2034 - WHITE NEOPRENE LINING

White 50 A durometer general purpose neoprene lining possessing excellent abrasion, oil, and corrosion resistance FDA compliant. A-I-E Cure.

2034 (202.5 KB) MSDS Coming Soon

2040 - CHEMICAL CURE CHLOROBUTYL LINING

Black, soft 60A durometer chemical cure Chlorobuty with tie gum. General purpose repair stock for Chlorobutyl lining. FDA compliant when C-600 activator is used to cure the rubber. For Non-FDA compliant application use C700 activator. Ambient cure or steam assist cure. Also available as an extruded lining.

2040 (204.1 KB) MSDS Coming Soon

2041 - SOFT NATURAL RUBBER LINING

White, soft, 40 A durometer chemical cure natural rubber lining. General purpose repair stock for white natural rubber lining. Excellent non-staining lining combining abrasion and corrosion resistance in temperatures ranges up to 160oF/71oC. FDA Compliant Activator C-600 or non FDA Compliant Activator C-700 is used to cure the rubber. Ambient cure or Steam Assist cure.

2041 (202.6 KB) MSDS Coming Soon

2042 - SOFT NATURAL RUBBER LINING

Tan, soft, 45 durometer chemical cure natural rubber lining. General purpose repair stock for tan natural rubber lining. Excellent abrasion and corrosion resistance, non-staining lining. FDA Compliant Activator C-600 or non FDA Compliant Activator C-700 is used to cure the rubber. Ambient cure or Steam Assist cure.

2042 (202.5 KB) MSDS Coming Soon

2048 - NITRILE RUBBER LINING

Black, 60A durometer nitrile rubber lining for general purpose use when petroleum, aliphatic solvents, animal, vegetable and mineral oils are present. A-I-E Cure.

2048 (203.5 KB) MSDS Coming Soon

2050 - BLENDED CHLOROBUTYL LINING

Black 55A durometer blended chlorobutyl, excellent for chemical resistance properties in high temperature application up to 220°F/104°C

2050 (202.6 KB) MSDS Coming Soon

2055 - BLENDED CHLOROBUTYL LINING

Black, soft, 55 A durometer blended chlorobutyl lining without tie gum. General purpose chemical resistance at elevated temperatures. A-I-E Cure. FDA compliant.

2055 (202.3 KB) MSDS Coming Soon

2056 - BLENDED CHLOROBUTYL OVERLAY

Black 55A durometer blended chlorobutyl rubber lining. Use as overlay for 1056. It provides excellent chemical resistance at elevated temperatures. Operating temperature range is from -4°F (-20oC) to 220oF (104°C).

2056 (202.8 KB) MSDS Coming Soon

2098 - CHEMICAL CURE TAN NATURAL RUBBER LINING

Tan 60A durometer chemical cure natural rubber lining with excellent chemical, abrasion and tear resistance. It is a general repair stock for tan natural rubber. It is FDA compliant as per 21CFR177.2600. Operating temperature range is from - 40°F (-40oC) to 160°F

2098 (150 KB) MSDS Coming Soon

3014 - SEMI-HARD NATURAL RUBBER

A general purpose semi-hard chemical cure repair stock for semi-hard natural rubber. Good chemical resistance at elevated temperature. FDA compliant.

3014 (202.2 KB) MSDS Coming Soon

3015 - TRIFLEX 3-LAYER COMBINATIONS

General purpose 60A surface durometer white faced Triflex™. Soft-Hard-Soft combines excellent abrasion and chemical properties with low water absorption characteristics. Flexible to withstand rapid changes in temperatures and related expansion and contraction. Superior performance in water treatment equipment. A-I-E Cure. FDA compliant.

3015 (204.4 KB) MSDS Coming Soon

3016 - TRIFLEX 3-LAYER COMBINATIONS

General purpose 85A surface durometer white faced triflex with natural rubber tie gum with excellent chemical and temperature resistance. Superior performance in water treatment equipment. A-I-E Cure. FDA compliant.

3016 (204.3 KB) MSDS Coming Soon

3049 - MILD OIL RESISTANCE LINING (MOR)

Black 55A natural rubber blend lining for general purpose use when abrasion and light moderate oil resistance is required. Operating temperature is from -40°F to 160°F

3049 (205 KB) MSDS Coming Soon

4631 - BLENDED CHLOROBUTYL LINING

Black, 55A durometer blended natural/chlorobutyl lining for reducing" chunking" on the ceiling of HCL tank cars. A-I Cure. FDA compliant.

4631 (202.3 KB) MSDS Coming Soon

4721 - LEAD CURE CHLOROPRENE BLEND LINING

Black 60A durometer lead cure chloroprene blend with good abrasion, weathering and corrosion resistance properties.

4721 (204.3 KB) MSDS Coming Soon

55159 - SBR FOR MOLDING APPLICATIONS

55 A durometer black SBR compound with good physical properties for sliding abrasion application. Operating temperature range is from - 40°F (-40oC) to 160°F (71oC).

55159 (202 KB) MSDS Coming Soon

55160 - SBR FOR MOLDING APPLICATIONS

Black 60A durometer SBR compound with ozone resistance and good physical properties.

55160 (74.5 KB) MSDS Coming Soon

55175 - SYNTHETIC RUBBER LINING

55A durometer black SBR blend compound with good physical properties for sliding abrasion application. Pressure cure or molding only.

55175 (201.7 KB) MSDS Coming Soon

5621 - NEOPRENE LINING

Black 55A durometer lead cure neoprene lining with good abrasion, weathering, flame and corrosion resistance properties. Good machining properties. A-I-E Cure.

5621 (204.3 KB) MSDS Coming Soon

5821 - HIGH ABRASION NEOPRENE LINING

Black 55A durometer lead cure neoprene lining with superior abrasion, weathering, flame and corrosion resistance properties. For molding and pressure cure applications only. Operating temperature range is from - 13°F (-25oC) to 203°F (95oC).

5821 (204.2 KB) MSDS Coming Soon

60714 - HIGH ABRASION NATURAL RUBBER LINING

65 A durometer black natural rubber lining with excellent abrasion resistance along with ozone and weather protection.

60714 (202.6 KB) MSDS Coming Soon

6511 - BROMOBUTYL CAP STRIP

50A durometer "Pure" bromobutyl rubber lining with superior temperature resistance in phosphoric acids and caustic solutions up to 260°F. A-I cure.

6511 (205.2 KB) MSDS Coming Soon

6512 - BROMOBUTYL LINING

50A durometer "Pure" bromobutyl rubber lining with a natural rubber tiegum. It provides superior temperature resistance in phosphoric acids and caustic solutions up to 260°F. A-I cure.

6512 (205.4 KB) MSDS Coming Soon

6550 - SUPERIOR ABASION BROMOBUTYL LINING

Black 60A durometer bromobutyl lining with superior abrasion and temperature resistance.

6550 (207.2 KB) MSDS Coming Soon

6585 - HIGH ABRASION SBR LINING

Black 65A durometer SBR lining with excellent abrasion resistance along with ozone and weather protection. For molding and pressure cure only!

6585 (201.4 KB) MSDS Coming Soon

68670 - SOFT NATURAL RUBBER LINING

Black 40A durometer natural rubber (EPSEAL) lining with excellent tear and abrasion resistance properties.

68670 (204.4 KB) MSDS Coming Soon

9159 - SYNTHETIC RUBBER LINING

55 A durometer black SBR compound with good physical properties for sliding abrasion application. Operating temperature range is from - 40°F (-40oC) to 160°F (71oC).

9159 (202.6 KB) MSDS Coming Soon

9160 - SYNTHETIC RUBBER LINING

60 A durometer black SBR compound with good physical properties for sliding abrasion application. Operating temperature range is from - 40°F (-40oC) to 160°F (71oC).

9160 (202.2 KB) MSDS Coming Soon

9169 - SYNTHETIC RUBBER LINING

60 A durometer black SBR compound with good physical properties for sliding abrasion application. Operating temperature range is from - 40°F (-40oC) to 160°F (71oC).

9169 (202.5 KB) MSDS Coming Soon




REQUEST FOR CONTACT

Looking for more information. Help us help you by filling out our simple online contact form.